I-Aluminium Copper kanye nezixhumi zohlobo lwe-Bimetallic
Idatha Yezobuchwepheshe
| Imodeli | I-Conductor Cross-section(mm2) Nge-6-50 Al 16-70 | Amabhawudi |
| I-CAPG-A1 | Nge-10-95 Al 25-150 | 1×M8×40 |
| I-CAPG-A2 | Nge-6-50 Al 16-70 | 1×M8×45 |
| I-CAPG-B1 | Nge-10-95 Al 25-150 | 2×M8×45 |
| I-CAPG-B2 | Nge-25-185 Al 35-200 | 2×M8×50 |
| I-CAPG-B3 | Nge-6-50 Al 16-70 | 2×M10×60 |
| I-CAPG-C1 | Nge-10-95 Al 25-150 | 3×M8×45 |
| I-CAPG-C2 | Nge-25-185 Al 35-240 | 3×M8×50 |
| I-CAPG-C3 | Nge-35-240 Al 35-300 | 3×M10×60 |
| I-CAPG-C4 | 3×M10×70 |
Okubalulekile
Amandla aphezulu we-aluminium alloy ngokufoja.Ukwelashwa kwendawo: Kukhanya.
Impahla yomkhiqizo
I-ALPG isetshenziselwa ukuxhuma noma ukuhlanganisa ama-AAC, AAAC noma ama-ACSR ama-overhead conductors.I-Forging idala i-clamp yamandla aphezulu.Izimbobo ezivaliwe zivumela ukulungiswa kwama-conductor ahlukahlukene ohlangothini ngalunye.Ukuhlolwa kohlobo lwayo kuhambisana ne-IEC61238-1.
Idatha Yezobuchwepheshe
| Imodeli | I-Conductor Cross-section(mm2) | Amabhawudi |
| I-APG-A1 | Al 16-70 | 1×M8×40 |
| I-APG-A2 | Al 16-150 | 1×M8×45 |
| I-APG-B1 | Ngo-16-35 | 2×M6×35 |
| I-APG-B2 | Al 16-70 | 2×M8×45 |
| I-APG-B3 | Al 16-150 | 2×M8×50 |
| I-APG-B4 | Al 25-185 | 2×M10×60 |
| I-APG-C1 | Al 16-70 | 3×M8×45 |
| I-APG-C2 | Al 16-150 | 3×M8×50 |
| I-APG-C3 | Al 25-240 | 3×M10×60 |
| I-APG-C4 | Al 35-300 | 3×M10×70 |
I-Parallel Groove Clamps Copper Extruded type
I-clamp yayiklanyelwe ukuxhuma ama-conductor angenalutho amabili afanayo.Ama-conductor angaba yi-copper stranded noma izinduku.Okubalulekile kuyithusi elifojiwe ukuze kuxhunywe ithusi kuye kwithusi kulo lonke uhla lwekhondatha.Ama-clamps anemisele evundlile ukuze axhumane ne-conductor ephezulu, sebenzisa amabhawodi ethusi futhi asebenzise amawasha ase-Belleville ukuvimbela ukugoba okushisayo ngaphansi kwemithwalo yama-cyclic.Ama-clamps ambozwe nge-oxide inhibitor.Futhi amabhodlela angagqwali namantongomane anamawasha kwakudingeka.
Okokuxhunywa kwe-tap-off of copper-conductors acc.ku-DIN 48201
Okubalulekile
Umzimba: Ingxube yethusi
Amabhothi: Insimbi noma insimbi engagqwali Amantongomane: I-DIN 934, Indawo yensimbi: engagqokile
| Imodeli | I-Bolt Torque | Ibanga le-Conductor mm2 | Ubukhulu mm OD | No./Usayizi Wama-Bolt |
| CU6-70-2 | 20Nm | 6 ku70 | 2.7 kuya ku-10.5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 ku95 | 5.1 kuye ku-12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 kuya ku-150 | 5.1 kuye ku-15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 kuya ku-240 | 15.7 kuya ku-20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 kuya ku-400 | 22.6 kuya ku-26.7 | 3×M12 |
